Filter
Top Products
Several alarm conditions may also be
displayed in the LCD display when needed:
1 Low fuel
2 Low oil pressure
3 Low voltage
Alarm messages will be displayed on the
tachometer LCD display. Messages will also
include a flashing red light. All messages
will be displayed until either the problem is
corrected or the operator manually cancels
the warning message.
Canceling system alarms
To manually cancel system warning
messages, simultaneously press both
the “Up” and “Down” buttons on the
tachometer.
This will disable the warning message
temporarily. If the problem is not corrected
in 1 minute (5 minutes for low fuel), the
warning will be displayed again. The
operator can cancel as often as desired.
Engine Hour meter
Displays the number of hours that the engine
has been operated. The display will show
“XXXX.XHr”.
There are no adjustments for this function.
Total Fuel Consumed
“Total Fuel Consumed” is provided to
allow monitoring of fuel usage over a
longer period of time, like a month or the
season. In order to prevent accidental reset,
this function must be accessed only using a
special “power on mode.”
The LCD screen displays the data for the
remainder of the functions. If there are
no alarm conditions, “Instantaneous Fuel
Consumption” is displayed on start-up. A
short press of the “Mode” button advances
the display through the five normally
available functions.
There are four functions displayed by the
Fuel Management system in normal mode.
Instantaneous Fuel Consumption
Displays the actual amount of fuel being
consumed per hour under the current
operating conditions. Default display will
show “G/H XX.X.”
Pressing the “Mode” button for more than
one second will allow selecting the units of
measure.
Default display will show “G/H XX.X.”
A short press of the “Mode” button advances
the display through the options.
Options are:
a) US gallons
Page 4