Filter
Top Products
7
2
3
1
8
p
9
7
4
6
45
7 Air Inlets (3 locations: front, right, bottom of unit)
The air inlets absorb air to cool the interior of the unit. Do
not block or allow warm air to blow into them.
This may lead to malfunction of the unit.
● The air inlet filter on the right side cannot be removed.
Please clean this filter regularly with, for example, a
vacuum cleaner.
8 Remote Sensor (Front)
When operating with the remote control, aim it towards
this sensor. (☞ Page 17)
● A remote sensor is also located on the rear of the unit.
9 Focus Ring
Turn manually to focus the projected image. (☞ Page 20)
p Zoom Ring
Turn manually to zoom the projected image. (☞ Page 20)
Controls and Features
1 Control Panel
For details, please refer to ‘Control Panel’. (☞ Page 10)
2 AC Power Input Terminal
This is the AC power input terminal. Connect the sup-
plied power cord to this terminal. (☞ Page 19)
3 Carrying Handle
Use this handle when carrying this unit.
4 Foot Lever (for front adjustable foot)
Use when extending or retracting the front adjustable foot.
(☞ Page 14)
5 Lens
This is a 1.3 x manual zoom lens.
Before projection, remove the lens cap. (☞ Pages 16, 19)
6 Lens Cap
It is recommended that the cap be fitted on the lens when
this unit is not in use to prevent the lens from becoming
dirty. (☞ Page 19)
Using the carrying handle
Front Side/Top Surface/Left Side