8
q Connector Panel
For details, please refer to ‘Connector Panel’.
(☞ Page 9)
w Lamp Cover
Remove this cover when replacing the lamp.
(☞ Page 28)
e Exhaust Vent
Warm air is expelled through this vent to keep the system
cool. Do not block the exhaust vents.
Rear Side/Right Side/Bottom Surface
q
w
r
e
7
y
7
t
u
r Remote Sensor (Rear)
When operating with the remote control, aim it towards
this sensor. (☞ Page 17)
● A remote sensor is also located at the front of the unit.
t Front Adjustable Foot (for adjusting height and
angle)
It is set at the lowest position when shipped from the fac-
tory.
The foot can be adjusted to a maximum angle of +6° and
a maximum length of 31 mm. (☞ Page 14)
y Filter
Cleans air drawn in from the air inlet.
Please clean this filter regularly. (
☞ Page 31)
u Rear Fixed Foot
Controls and Features (continued)
Blocked as it is not in use.
Opening it forcibly will cause
damage to the unit.
Bottom Surface