Filter
Top Products
36
Adjustment and Setting Using Menus
3 “Set up” menu
To set the basic setting for Tracking and Positioning of the pic-
ture image, you can adjust the items in the “Set up” menu as
below.
• The adjustment items differ when selecting Video input and
PC input.
When Video input is selected
Adjustment item (press
ᮡ
/
ᮢ
) Adjustment content (press
ᮤ
/
ᮣ
)
“Position” The position of the image and the menu
can be adjusted.
[ Press the ENTER button to enter the
“Position” menu 4.
“Deinterlace” This is set when viewing movies.
“AUTO”: Normally, the projector is set to
AUTO.
“OFF” :This is set when not viewing mov
ies.
“HDTV” In order to display the signals of “HDTV”
by the exact aspect ratio of 16:9, the right
numerical value has to be set.
“1080i” : Normally, set to 1080i.
“1035i” : Set when high vision signals are
used.
“SF” :Used for segment frame signals
“Aspect ratio” Select the vertical-to-horizontal ratio of
the image projected.
Set it to 4:3 for the normal television im-
age input and 16:9 for Hi-Vision input.
When the “Screen” mode is set to 16:9,
UXGA signals cannot be projected.
Set value: 4:3, 16:9 [4:3]
“Decoder” Sets the “Decoder”.
[ Press the ENTER button to enter the
“Decoder” menu 5.
“Phase” Adjusts flickering or dim image.
(setting is normally not required)
When the “Screen” mode is set to 16:9,
UXGA signals can not be projected.
Set value : 0 ~ 31 [Varies with signals]
When PC input is selected
Adjustment item (press
ᮡ
/
ᮢ
) Adjustment content (press
ᮤ
/
ᮣ
)
“Position” Adjusts the position of the image and
menu display.
[ Press ENTER to go to the “Position”
menu 4.
“Tracking” Adjusts lateral size and display area of
image. (Setting is normally not required.)
[varies with signal]
“Phase” Adjusts flickering or dim image.
(adjustment is normally not required.)
Set value : 0 ~ 40 [Varies with signals]
“Resize” When the image resolution is smaller than
that of the projector’s D-ILA element, the
projected image will be enlarged to almost
the full screen size.
Set Value : *“1:1”, “Panel”, “Aspect”
[“Aspect”]
1 “Image adj.” menu
Image adjustment.
You can adjust the following items on the “image adj.” menu.
• The items displayed differ when Video input or PC input is
selected.
• There is no display when no image signal is inputted.
Adjustment item (press
ᮡ
/
ᮢ
) Adjustment content (press
ᮤ
/
ᮣ
)
“Contrast” Adjusts the contrast of the picture image.
Set value: -30~30 [0]
“Brightness” Adjusts the brightness of the picture im-
age. Set value: -30~30 [0]
“Color” Adjusts the color density of the picture
image. Set value: -30~30 [0]
“Tint” Adjusts the tint of the picture image. Set
value: -30~30 [0]
“Sharpness”* Adjusts the outline of the picture image.
Set value: -3~3 [0]
“Color temp.” Adjust the Color temperature of the
screen.
[ Press ENTER button to go into the
Color temperature setting menu.
“Reset” Resets all items in the “Image adj.”
submenu to the pre-set values( ie values
set upon purchase).
[ Press ENTER button to reset.
* In the “Set up” menu 3, if the “Resize” function in the PC submenu is
set to “1:1”, the image quality will not change even if the value is
changed. (No adjustment)
2 “Color temp.” menu
To adjust the “Color temp.” of the projected image, press the
(
ᮡ
/
ᮢ
) CURSOR buttons and choose the setting. Next press
the (
ᮤ
/
ᮣ
) CURSOR buttons to set the “Color temp.”. If “6500”
is set, the image will turn out reddish.
Set value: “6500”, “Normal”, “User” [“User”]
“RED” : –255 ~ 0 [0]
“GREEN” : –255 ~ 0 [0]
“BLUE” : –255 ~ 0 [0]
The Menu Configuration
The value in [ ] of each item is the manufacturer set value.
• Press the ENTER, EXIT or the right CURSOR button (ᮣ) to
operate the MENU while it is displayed.
• The submenu corresponding to the item selected is displayed
on the right-hand side of the main menu.
• The items indicated differ when Video input and PC input is
selected or when there is no image signal inputted.
• When “Information” has been selected, the present selected
image input information, etc., appears on the right side of the
menu.
There is no submenu for this “Information” menu. (For details,
please See ‘Main: “Information” menu’ on page 39.)
When Video input is selected When PC input is selected
The color temperature has been optimized,
Do not change