Filter
Top Products
FS-8700-132 Gamewell FCI-E3 Driver Manual Page 20 of 20
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Stat Offset
Description
#define FCI_E3_STAT_RCVD_BYTES 12
Increments each time a character
is received from the panel. The
bytes are only added when a
message terminator is received.
Thus this count is equivalent to
the byte count in all
FCI_E3_STAT_RCVD_MSGS
#define
FCI_E3_STAT_PARSED_NO_ERRS_EXCLD_RESET
13
Increments each time a message
is parsed without errors. Excludes
Reset Messages
#define FCI_E3_STAT_PARSED_NO_ERRS_RESET 14
Increments each time a reset
message is parsed without errors.
#define FCI_E3_STAT_PARSED_NO_ACTION 15
Increments each time a message
is parsed with no errors but the
nature of the message doesn’t
require data to be stored. (eg
empty message lines)
#define FCI_E3_STAT_PARSED_WITH_ERRS 16
Increments each time a message
produces an error when parsed.
#define FCI_E3_STAT_INHIBIT_RESET 17 Set to 1 to inhibit resets altogether
#define FCI_E3_STAT_INHIBIT_RESET_DA_PUT 18
Set to 1 to inhibit resets from
clearing arrays
#define FCI_E3_STAT_INHIBIT_RESET_WHILE 19
Set to 1 to inhibit the reset
function from looping through Map
Descriptors
#define FCI_E3_STAT_NODE_INFO_MSG 20
Increments each time a message
with Node information is received
#define
FCI_E3_STAT_NO_PLACE_TO_STORE_NODE
21
Increments each time an event
message containing Node
information relating to a Node that
cannot be found is discarded.