Fisher PLC-XU10N Projector User Manual


 
35
MCI MODE
PICTURE IMAGE ADJUSTMENT
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE and
press the SELECT button. Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to
or of the item that you want to change by
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to
and then press the SELECT button. To
decrease the value point the arrow to
and then press the
SELECT button.
1
2
Adjust Picture Image Manually
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.) This item can be adjusted by pressing the FINE
SYNC. button on the Top Control or the Remote Control Units.
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
Contrast
Point to to adjust the image lighter, and select to adjust the
image deeper. (From 0 to 63.)
Brightness
Point to to adjust the image darker, and select to adjust the
image brighter. (From 0 to 63.)
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.
Move the arrow to
or and press
the SELECT
button.
It indicates the
roughly level of
the item.
It recalls the data previously adjusted.
Reset
It stores the adjusted data in the memory.
Stored
It closes the PICTURE IMAGE ADJUSTMENT Menu.
Quit
White Balance (Red / Green / Blue)
Point to to adjust the color of image lighter, and select to adjust
the image deeper. (From 0 to 63.)
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control Units). The "Normal" display
will be displayed on the screen for a few seconds.
Normal Function
Normal
Each of the keys operates as follow.