Filter
Top Products
4
X-24
1. SPECIFICATIONS
DEFINITION
Specification Unit 0 dBV = 1 Vrms
Normal Fader Position
Input fader At 8 ± 1 position
Condition LINE IN / INSERT: -10 dBV / 1 kHz
Recorder: Input Monitor mode (REC - PAUSE)
Adjust input fader for -10 dBV at TAPE OUT.
PAN: L (R)
Master fader At 8 ± 1 position
Condition LINE IN / INSERT: -10 dBV / 1 kHz
Recorder: Input Monitor mode (STOP)
Adjust master fader for -10 dBV at LINE OUT.
PAN: L (R)
MIXER SECTION
Standard Input
MIC IN
Connector Phone (unbalanced) / XLR (balanced)
Input level -50 ~ -10 dBV
Impedance 10 kΩ or more
LINE IN / INSERT (RCV)
Connector Stereo phone (tip)
Input level -10 dBV
Impedance 10 kΩ or more
Standard Output
TAPE OUT 1 ~ 4
Connector RCA pin
Output level -10 dBV
Load impedance 10 kΩ or more
LINE OUT L, R
Connector RCA pin
Output level -10 dBV
Load impedance 10 kΩ or more
INSERT (SEND)
Connector Stereo phone (ring)
Output level -10 dBV
Load impedance 10 kΩ or more
Phones Max. Output Level 20 mW or more (1 kHz, 16 Ω load)
Level Indication 0 dB is indicated by 5-dot LED bargraph meter when input / output
level is -10 dBV with the above standard input / master fader
position settings.
Frequency Response
MIC IN (Input Level: -50 dBV) 40 ~ 20 kHz ± 3 dB at LINE OUT
MIC IN (Input Level: -10 dBV) 20 ~ 20 kHz ± 3 dB at LINE OUT
LINE IN (Input Level: -10 dBV) 50 ~ 10 kHz ± 2 dB at PHONES (10 mW / 16 Ω)
S / N (shorted by 150
ΩΩ
ΩΩ
Ω resistor)
MIC IN (MIC GAIN: MIC) 66 dB or more at LINE OUT (DIN AUDIO)
68 dB or more at LINE OUT (IHF A)
MIC IN (MIC GAIN: LINE) 73 dB or more at LINE OUT (DIN AUDIO)
75 dB or more at LINE OUT (IHF A)