29
Model X-34 Owner’s Manual
Specifications
MIC INPUT (x 2)
Connector : XLR type connector
(Balanced)
:
ø 6 PHONE jack (Unbalanced)
Input impedance : 10k
Ω
or higher
Reference input level : –50 ~ –10dBV
LINE/INSERT (x 4)
When using the LINE IN jack:
Connector : ø 6 PHONE jack
Input impedance : 10k
Ω
or higher
Reference input level : –10dBV
When using the INSERT jack:
Connector : ø 6 STEREO PHONE jack
(Tip :Return, Ring :Send)
AUX RTN (L/MONO, R)
Connector : ø 6 PHONE jack
Input impedance : 7k
Ω
or higher
Reference input level : –20dBV
LINE OUT (L, R)
Connector : RCA pin jack
Output load impedance : 10k
Ω
or higher
Reference output level : –10dBV
TAPE OUT (x 4)
Connector : RCA pin jack
Output load impedance : 10k
Ω
or higher
Reference output level : –10dBV
PHONES
Connector : ø 6 STEREO PHONE jack
Output load impedance : 16
Ω
or higher
Maximum output : 20mW (at 32
Ω
)
AUX SEND
Connector : ø 6 PHONE jack
Output load impedance : 10k
Ω
or higher
Reference output level : –10dBV
MONITOR OUT (L/R)
Connector : ø 6 PHONE jack
Output load impedance : 10k
Ω
or higher
Reference output level : –10dBV
Recording Tape :C-90 (TYPE-2 or HIGH
position) or shorter
Record tracks : 4 tracks, one direction
Tape speed : 9.5 cm/s, 4.75cm/s
Pitch control : –50% – +12%
Noise Reduction :Dolby B noise reduction
system
EQ : 2-band, shelving
+/–12(HI : 10kHz, LO : 100Hz)
Tape rewinding time : 150 seconds (when a C-60
tape is used)
Frequency response : Mixer section; 20Hz ~ 20kHz
: Recorder section; 40Hz ~
14kHz
Heads : 4-tracks, 4-channel recording/
playback 4-tracks, 4-channel
erase
Power supply : Fostex AC adapter, AD-12C
DC 12V (12 ~ 16V), 11W
Weight : Approx. 1.7 kg (excluding the
AC adapter)
Dimensions : 335 (W) x 75 (H) x 247(D) mm
* Specifications and appearance are subject to change
without notice for purpose of product improvement.
* Dolby Noise Reduction is manufactured under license
from Dolby Laboratories Licensing Corporation.
* Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.