Filter
Top Products
GB
3
15
Chapter 3: Driver installation
Under Windows ME / 2000 / XP a separate Freecom driver is not required. The
drivers for Windows ME, Windows 2000 and Windows XP will be installed
automatically by the operating system after plugging in the Freecom FHD-3 into
the USB port of the computer.
3.1 FHD-3 USB 2.0 version
Driver installation USB under Windows 98 SE
Note: Your Freecom FHD-3 is fully backwards compatible with USB
1.1. The installation for USB 1.1 is the same as described below for
USB 2.0.
1. Insert the Freecom Manual and driver CD into the CD-ROM drive.
2. Connect your Freecom FHD-3 to the USB connector of your notebook or
computer.
3. The "Add New Hardware Wizard" opens and a "USB 2.0 Device" (USB 2.0 PCI
Host Controller) or a "USB2-IDE Controller" (USB 1.1 connector) is found.
Click on "Next".
Driver installation