9
EN
1
Hardware Installation
1.2 RFID sensor and LEDs
1. RFID sensor
This is the position where the keycard needs to be held to unlock the drive.
2. LED (green/red)
LED off: keyc
ard protection not configured
LED red, flashing quickly: wai
ting for initial recognition of the first
Keycard
LED green, flashing quickly: waiting for initial recognition of the second
Keycard
LED red, flashing slowly (1 second gap): delay of error detection
LED red, bright: har
d drive locked, can not be accessed
LED green, bright: har
d drive unlocked, ready for use (read data
from / write data to the hard drive)
LED red, flashing quickly: era
sing data on the hard drive
3. LED (blue)
LED blue: dev
ice on
LED blue blinking: dat
a transfer
2. LED (green/red)
3. LED (blue)
1. RFID sensor