Filter
Top Products
17
i.MX31 PDK 1.4 Quick Start Guide
3
Build the Platform
This chapter explains how to connect the three types of 3-Stack boards (Debug,
Personality, CPU) together, to make either a development platform (Personality board +
CPU board + Debug board), or a demonstration platform (Personality board + CPU
board); and how to connect the 3-Stack platform to your PC. See Figure 3.1
.
Figure 3.1 3-Stack Platform Configurations
The three 3-Stack boards in your development kit may already be assembled. If the three
boards are already assembled, review the procedures in the following sections, and be sure
to configure the Debug board appropriately.
• To build a development platform, follow the procedures in “Build a Development
Platform: Assemble Three Boards” on page 17.
• To build a demonstration platform, follow the procedures in “Build a Demo
Platform: Assemble Two Boards” on page 21.
Build a Development Platform: Assemble
Three Boards
This section explains how to connect the Personality, Debug, and CPU boards.
Development
Configuration
Personality Board
Debug Board
CPU Board
Demo
Configuration
Personality Board
CPU Board
3 Board Stack 2 Board Stack
3StackQS_WinCE.book Page 17 Sunday, September 28, 2008 1:58 PM