Freescale Semiconductor i.MX31 PDK 1.4 Network Card User Manual


 
About the Boards
About the 3-Stack Platform System
5
i.MX31 PDK 1.4 Quick Start Guide
Debug Port
•RealView
®-ICE debug support
Video and Audio
Stereo
Stereo microphone jack, headphone and video jack,
stereo and mono (ear piece) speaker terminals
GPS Connector One connector to outboard GPS module
FM Receiver
TV Out TV decoder that supports 8-bit color, NTSC and PAL
formats
PC Card Expansion SD card connectors, with card sense
Keypad Onboard keypad and keypad connector
Network Support Onboard Wi-Fi CERTIFIEDFter IEEE 802.11 b/g
standards and Bluetooth(r) Core Specification
Version 2.0 + EDR (enhanced data rate)
combination module
One Ethernet jack connector (for application/debug)
USB One USB OTG high-speed transceiver with mini-
USB connector
One USB high-speed host transceiver, with
standard USB host connector
ATA Support ATA5 controller with
One 44-position dual row 2 mm header for small
form-factor disk drivers
One 40-pin ZIF connector for Toshiba HDD
Accelerometer Onboard accelerometer with sensitivity in three
separate axes (X, Y, Z)
Serial Port Two RS-232 interfaces with DB-9 connectors
One RS-232 interface is driven by a UART channel
internal to the MX31, and it supports DCE with
optional full modem controls
The other RS-232 interface is DTE with optional full
modem controls
Table 1.1 3-Stack Platform Features
Details
3StackQS_WinCE.book Page 5 Sunday, September 28, 2008 1:58 PM