Filter
Top Products
6
2. Main Menu Screen 6-19
POD Operations
Transferring Screen Data from a CF Card
The procedure of transferring data between the UG230 and a CF card is described below.
1. Mounting the CF Card
Insert the CF card into the CF card connector at the side of the UG230.
* Do not remove or insert the CF card in the later steps.
2. Data selection
Select [Screen Data]. When the lamp is red, it is selected.
3. Transfer selection
Select [Display <-- Card], [Display --> Card] or [Display <--> Card].
When [Display <-- Card] is Selected:
Transfer screen data from the computer to the CF card.
1. When [Display <-- Card] is selected, the following screen is displayed.
Data selection Transfer selection
Flashes during communication with the CF card.
Moves back to the previous
screen.
Indicates the free space
in the CF card.
Indicates the name of the
currently selected folder.
The access folder that is set
for screen data defaults.
If there is no screen data,
“DAT0000” defaults.
Indicates the information of the currently selected folder.
Starts transferring data
[Display <-- Card].
Used for checking or
renaming folder names.