Fujitsu 510 Graphics Tablet User Manual


 
1-6
Getting Started
The following table shows the name and symbol for each status light, and what the
lights mean when they are on, off, or flashing.
For details on the Fully On, Suspend mode, and Fully Off power states shown by the
Power light, see “Power” on page 2-1. For more information about battery use and
maintenance, see “Charging the Battery Pack” on page 2-8.
Power Indicates power usage.
Light on continuously: Pen tablet is
Fully On
(running).
Light flashing:
Suspend mode
(flashes every 4 seconds).
Light off: Pen tablet is
Fully Off
(not running).
HDD Access Indicates when the pen tablet is reading or writing on the internal
hard disk drive (HDD).
Charge
Status
Green LED that indicates power source and charge status.
On continuously: Fast charge (0 to 89% of capacity).
Flashing: Slow charge (90-99% of capacity).
On once: External power attached.
*
Off: Battery charged or on external power.
*
External power can come from an AC adapter, auto adapter, or a Point 510 cradle that supplies
power.
Low Battery Amber LED that indicates low battery conditions.
On continuously: Critically low battery.
Flashing quickly: 1/2 second on, 1/2 second off - very low
battery.
Flashing slowly: One second on, one second off – low battery.
Very slow flash: Flashing every 4 seconds – very low battery
during Suspend mode.
Off: Adequate power.