Filter
Top Products
2-10
Using the Point 510 Pen Tablet
Removing and Installing the Battery Pack 2
The battery pack can be removed from the Point 510 pen tablet and replaced with a
charged battery pack. You can then charge the removed battery pack in the optional
external battery charger. You can remove or install the battery pack while the system
is Fully Off or in Suspend mode.
To remove and install a battery pack on the Point 510 pen tablet:
1. Save any important files and information in programs that you are using.
2. Put your pen tablet in Fully Off or Suspend mode. For more information, see
“Suspending and Resuming Operation” on page 2-6.
3. Slide the battery latch on the battery pack in the pen tablet open as shown in the
following illustration.
4. Slide the battery pack out of the pen tablet.
Removing the Battery Pack
5. On the charged battery pack, slide the latch open. Slide the charged battery pack
into the system unit until it fits snugly. Slide the latch forward into the closed
position.
Battery Pack Battery Latch
Slide latch to open.
Slide battery pack
out to remove.