Filter
Top Products
Operation
If you wish to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation s ome functions are not available, they are not needed because
of the digital transmission technology being used.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the dis
play
With this function you can cha
nge the brightness of the background lighting.
You can see w hether the ECO ope
rating mode is active under the bar for
displaying the brightness se
tting.
Contrast
Set the contrast of the display
With this function you can modify the contrast of pale colours.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colours.
Auto level *
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed w ith the
SELECT / MENU
button.
* function n ot available in DV
I mode
If the contrast is set too hi
gh, bright surfaces can no longer be d istinguished from very
bright surfaces. If the con
trast is set too low, the maximum brightness will not be achieved.
18 A26361-K1334-Z220-1-7619, edition 1