Filter
Top Products
D2530 (Econel 200 S2) Technical Manual 17
Features PCI bus
The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for each PCI
slot (except the PCI-Express slots).
The same interrupt can be assigned simultaneously to several PCI boards. You
should avoid this condition due to reduced performance.
If you use a setting other than Auto, the Plug&Play functionality of the system
BIOS for the corresponding PCI boards is deactivated.
Auto The PCI interrupts are assigned automatically in accordance with
the Plug&Play guidelines.
Disabled No ISA interrupt is assigned to the PCI interrupt.
3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
The selected ISA interrupt is assigned to the PCI interrupt. You
may not select an ISA interrupt that is used by a component on
the system board (e.g. controller) or an ISA board.
Device
Bus IDsel INTA INTB INTC INTD
Slot 1 PCI-X 1
9 PXIRQ8 PXIRQ9 PXIRQ10 PXIRQ11
Slot 2 PCI-X 18 PXIRQ4 PXIRQ5 PXIRQ6 PXIRQ7
Slot 3 PCI-X 1
7 PXIRQ0 PXIRQ1 PXIRQ2 PXIRQ3
Slot 4 PCI 17 PIRQA PIRQB PIRQC PIRQD
Slot 5 PCI-Express
Slot 6 PCI-Express
VGA PCI 18 PIRQB
LAN PIRQE
USB UHCI
Controller #0
PIRQA
USB UHCI
Controller #1
PIRQD
USB UHCI
Controller #2
PIRQC
USB UHCI
Controller #3
PIRQA
USB 2.0 EHCI PIRQH