Filter
Top Products
D2530 (Econel 200 S2) Technical Manual 21
Features Connectors and jumpers
Settings with jumpers
The system board is supplied with all jumpers set on default position (pin 1-2).
KBPWR (1)
USBPW 1/2 (2) and USBPW 3/4 (15)
BIOSREC (19)
VGA_EN (22)
CLRTC (23)
7 = CPU2 fan 21 = LPT1
8=RAID key 22=VGA_EN (jumper)
9=SATA 1 - 6 23=CLRTC (jumper)
10 = USB 7/8 24 = LAN_EN (jumper)
11 = IDE primary 25 = LAN_BW (jumper)
12 = HDLED 26 = rear fan
13 = intrusion 27 = external connectors
14 = front panel A = 5V Standby LED
1-2 PS/2 keyboard/mouse powered by 5V (default)
2-3 PS/2 keyboard/mouse powered by 5V Standby
1-2 USB device powered by 5V (default)
2-3 USB device powered by 5V Standby
1-2 system BIOS (default)
2-3 recover system BIOS (Flash BIOS, Recovery Diskette required)
1-2 onboard VGA enabled (default)
2-3 onboard VGA disabled (PCI VGA graphics controller)
1-2 CMOS/RTC settings are not cleared (default)
2-3 clear CMOS/RTC settings