Fujitsu FBR12 Switch User Manual


  Open as PDF
of 6
 
(a) Series Name FBR12 : FBR12 Series
(b) Enclosure & Coil Power
N : Standard (plastic sealed type)
W : High dielectric strength type (plastic sealed type)
H : High sensitivity type
(c) Coil Type D : DC coil
(d) Nominal Voltage Refer to the COIL DATA CHART
(e) Contact Material
Nil : Gold-overlay silver-nickel
–P : Gold-overlay silver-palladium
(f) Custom Designation To be assigned custom specification
(g) CSA Standard
–CSA : UL114 + CSA recognized
–CSA : UL1950 + CSA (under application)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR12ND05
Stamp: 12ND05
■ FEATURES
● Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP
Up to 50% less volume and board area than previous
generation telecom relay.
● Slim type for high density mounting
● Conforms to Bellcore TR-NWT-001089 and FCC Part 68
requirements
● UL recognized and CSA certified
● Low power consumption
● Conforms to IEC 950 (W type only)
– 2.5 mm clearance and creepage between coil and contacts
–5000 V surge strength between coil and contacts (2x10µs
surge wave)
–2000 Vrms dielectric strength between coil and contacts
–UL 1950 and IEC950 (approval in process)
FBR12 N D 12 –P
–** (–CSA)
[Example]
(a) (b) (c) (d) (e) (f) (g)
FBR12 SERIES
MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
■ ORDERING INFORMATION
1
■ SAFETY STANDARD AND FILE NUMBERS
Nominal coil voltage Contact rating
0.5 A 125 VDC resistive
3 to 24 VDC 2 A 30 VDC resistive
0.3 A 110 VAC resistive
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
NOT FOR NEW
DESIGN
FBR12 SERIES TO
BE DISCONTINIED
next