Filter
Top Products
28
b. [Direct Switching Via Keyboard]
8-port KVM Switch
1) Use the number keys <1>~<8>. For a cascaded setup, first use the number keys
<1>~<8> to select a master-side channel, then use the function keys <F1>~<F8> to
select a slave-side port.
16-port KVM Switch
1) To select master port #1: press <1> (& wait 1 sec), or press <1> then <Enter>
2) To select master port #14: press <1><4> on the keyboard (press <4> within one second
of pressing <1>)
3) To select master port #2: press <2> on the keyboard
4) With a cascaded connection, select the port where the first cascaded connection on the
master side was made.
To select slave port #1: press <F1>, or press <F>+<1> (& wait 1 sec) or <Enter>
To select slave port #14: press <F>+<1>+<4> (press <4> within one second after pressing
<1>)
To select slave port #2: press <F2> or <F>+<2>
Screens can be switched directly by these key operations.
After the screen is switched, the name of the server that you switched to is displayed at
the top left of the screen, the OSD screen display disappears after about three seconds,
and the Hot Key Mode is exited.
When selecting a port in a cascaded connection, first select the cascaded
connection port on the master side. Then, select and switch to the port on
the slave side.