Filter
Top Products
6
● When using a mouse with a scroll function such as a mouse with PS/2 wheel, scrolling
outside of the support sometimes does not function properly. Also, the scroll mice may
fail to function properly depending on the software used.
● The keyboard and mouse connectors are the same shape. Be sure the colors match to
connect them correctly. If they are forced in or connected incorrectly, the switch device
may not only function improperly but also may malfunction.
● Set up the console’s keyboard and mouse with each server correctly. If they are not set
correctly they will not operate normally.
● Hook up the cables for each port to the same server. If the monitor, keyboard, and
mouse port numbers are wrong, you will not be able to select the server correctly.
● A DVI (Digital Video Interface) compatible display can not be connected.
● When connecting a monitor other than the one for Console Drawer, use one that is
multi-scan compatible, and set the correct resolution. KVM Switch supports a
resolution of 1600 x 1200 with a refresh rate of 75 Hz. Also, the display may be off
center after switching depending on the monitor and resolution settings. Adjust the
monitor or video card if this happens.
● Degradations in high resolution screen quality, such as ghosts or blurring, may be due
to the monitor cable or video card. Also, the screen may not display normally
sometimes, depending on the particular combination of display and video card. Try
changing the settings of the environment in which the video card, for example, is
connected.
● The monitor cable connector is a Mini D-SUB 15P type. Make sure you connect it in
the correct orientation and use the fixing screws to hold it in place. It may cause trouble
if it is not connected properly.
● Cascaded connections must be setup exclusively with our KVM switches only. You can
not make these connections with switches produced by other manufacturers.
● A maximum of two levels of cascaded connections are allowed (including the ma
ster).
Attempting to cascade three or more levels will not work.
Disposal
This device is manufactured with metal and plastic parts. Dispose of it according the
relevant government regulations.
Moving Console Drawer
When moving the Console Drawer to a different location, use
the box in which it was purchased or a box that protects the
product from bumping and shaking. Do not unpack the Console
Drawer until the move has been completed.
CAUTIO
N