Fujitsu FD-1008AT Switch User Manual


 
31
Constant Server Name Display Function
When the device is operating in normal Console Mode, holding the <Shift> key down and
pressing the <Scroll Lock> key twice causes the server name for the currently selected
channel to be shown in the top-left of the screen.
If the server name is being displayed, holding the <Shift> key down and pressing the
<Scroll Lock> key twice again causes the server name to disappear from the screen.
The factory default is for the host name to not be shown.
Server names are not displayed while in the Hot Key Mode or the Auto Scan Mode.
While in the Hot Key Mode, holding the <Shift> key down and pressing the <Scroll Lock>
key twice will not cause the host name to be shown/hidden.
The current Show/Hide Server Name state is retained after switching the server via
selector buttons or OSD.
If a FS-10x series device (previous model) is used in a cascaded setup, some or all of the
server names may not be displayed, depending on the exact setup used:
- If a device that is not capable of showing server names is used as the master device, no
server names will be shown.
- If a device that is not capable of showing server names is used as a slave device, no
server names will be shown for the channels of that device.