Filter
Top Products
7-1
Activating the Setup Mode
This section describes how to activate the setup mode.
<Screen M1>
1 Turn the power On. Then the scanner
displays “Scanner Ready” on the LCD.
<Screen M2>
2 If the scanner does not have a video interface
option, go to the procedure step 3. Press
then the scanner with the video
interface option displays Screen M2.
<Screen M3>
3 Press then the scanner displays
Screen M3.
<Screen M4>
4 Press then the scanner displays
Screen M4.
5 Press . Now the scanner is at Screen
41 (page 6-3) in Setup mode.
NOTICE
Any time you press , you can return to the “Scanner Ready” screen.