Filter
Top Products
7-15
18. Adjust FB Erasing Edges
<Screen 58>
1 Press “Next” or “Previous” and let the
scanner display Screen 58.
2 At Screen 58, press or to select “Yes”
and press . Then the scanner displays
Screen 58-1.
<Screen 58-1>
3 At Screen 58-1, select “Yes” to return the
settings to the factory default or select “No” to
make new settings (as shown below). Then
press . The scanner displays Screen
58-2.
<Screen 58-2>
4 At Screen 58-2, press or to change the
top setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays Screen 58-3.
<Screen 58-3>
5 At Screen 58-3, press or to change the
bottom setting. With (+:Up), the area is set
upward from the bottom edge of the image.
With (–:Down), the area is set downward
from the bottom edge of the image. The
value changes in 1 mm units. Then press
to activate the setting. The scanner
displays Screen 58-4.
<Screen 58-4>
6 At Screen 58-4, press or to change the
left setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays Screen 58-5.
<Screen 58-5>
7 At Screen 58-5, press or to change the
top setting. The value changes in 1 mm
units. Then press to activate the
setting. The scanner displays the next setup
item.