Filter
Top Products
2.2 Loading Documents on ADF
fi-5015C Image Scanner Operator’s Guide 13
BASIC SCANNER OPERATIONS
2
• Documents that are not square or rectangular
• Very thin documents
Do not use the following documents:
• Paper-clipped or stapled documents
• Documents on which the ink is still wet
• Documents other than paper such as fabric, metal foil, or transparencies
HINT
• When scanning semi-transparent documents, slide the [Brightness] bar
to light to avoid bleed through.
• To prevent the rollers from becoming dirty, avoid scanning documents
containing large areas written or filled in pencil. If scanning of such doc-
uments is unavoidable, clean the rollers frequently
ATTENTION
• Carbonless paper contains chemical substances that may damage the
Pad ASSY or rollers (e.g. Pick roller) when these types of documents
are fed. Pay attention to the following:
Cleaning:
If pick errors occur frequently, clean the Pad ASSY.
For details on cleaning the Pad ASSY, refer to "3.2.3 Cleaning the
ADF" on page 39.
Replacing parts:
The service lives of the Pad ASSY and Pick roller ASSY are some-
times shortened when scanning medium-grade paper documents.
• When documents of Wood containing paper are scanned, the life of
Pad ASSY and Pick roller ASSY may be shorter compared with the
case where the manuscript of Woodfree paper is scanned.
HINT
When using the ADF, the leading edge of all document sheets must be
evenly aligned. Make sure that curling at the leading edge is within the
following tolerances:
More than
30
m
m
F
eed
d
ir
ec
ti
on
R
ead
su
rf
ace
To
p
of the
p
a
p
e
r
L
ess
th
an
3mm
F
eed
d
ir
ec
ti
on
Read surface
Top of the paper
L
ess
th
an
5mm