Filter
Top Products
18
When the following error messages are displayed on the operator panel, the imprinter is malfunctioning. Recover the
imprinter according to the means following the cause.
Possible causes are as follows:
• The imprinter is set out of the paper path.
Set the imprinter in place.
• The stacker is full of documents.
Remove documents from the stacker.
Possible causes are as follows:
• Loose contact of the signal electrodes of the print cartridge.
Reinsert the print cartridge in place.
• The imprinter cannot correctly communicate with the scanner.
Connect the imprinter cable correctly.
• The motor, sensor, or program memory is out of order.
Turn off the power, and then turn on again.
Possible causes are as follows:
• The print cartridge is not installed.
Insert the print cartridge.
5. Error Messages
P r i n t A l a r m
I m p r i n t e r A l a r m
N o I n k C a r t r i d g e