Filter
Top Products
SCALEOVIEW H22-1W
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Basic monitor settings with the CD supplied
If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000,
Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be
set with the CD supplied.
► Insert the supplied CD into the CD-ROM drive.
► Open the
Readme file on the CD and follow the instructions in the file.
Your monitor should now already be properly adjusted. If none of the above operating systems is
used or minor corrections are to be made to the screen display, then change the monitor settings
with the OSD menu.
Changing the monitor settings with the buttons of the control panel
1 = Buttons for the OSD menu
(On-Screen-display)
2 = ON/OFF switch with power indicator
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
Performing auto-adjustment of the monitor
► Press the EXIT/AUTO button for approx. 1 second while the OSD menu is switched off.
The
Auto Processing message is displayed.
Picture quality and position are set to optimum values for your system.
Selecting input signal (Analogue/Digital/HDMI/Video/S-Video)
► Press the
5
/INPUT button for approx. 1 second for calling the Input select setting window.
► Press the
6/ or 5/INPUT button to select the desired input (Analogue/Digital/HDMI/Video/
S-Video).
Activation/Deactivation of DDC-CI Function
► Press the MODE button and 5/INPUT to deactivate or reactivate the DDC-CI Function.
Selecting colour optimisation (MODE)
► Press the MODE button for calling the Mode setting window.
► Press the
6
/ or
5
/INPUT button to choose the desired colour optimisation.
A26361-K1118-Z120-1-7619, edition 3 15