Filter
Top Products
3
Removing the Protective Packaging
Follow the procedure described below to remove the protective packaging before using the ScanSnap.
1. Open the ADF paper chute (cover) (1), and
pull the tape to remove the protective foam
sheet (2) from the stacker. Open the stacker
(3) and pull the tape to remove the
protective sheet from the ADF top section
(4).
2. Pull the ADF release tab to open the ADF
top section, and pull the tape to remove the
protective card from the side guides.
Installing the Software
Windows
®
Installation (J page 4)
Mac OS Installation (J page 7)
CAUTION
If the magnetic part of the ADF top section makes contact with the black magnetic part
of a magnetic card or IC card, the data on the card may be lost.
ATTENTION
zDo not connect the ScanSnap to your computer before installing the software.
zIf you have no DVD-ROM drive, please visit the following web page:
http://scansnap.fujitsu.com/g-support/en/
HINT
When you export the data scanned by the ScanSnap to your mobile device, download ScanSnap Connect
Application from an available source such as iTunes, App Store, or Google Play.
2
2
2
1
3
4
ADF Top
Section
ADF Paper Chute (cover)
Stacker
Protective
Card and
Tape
ADF Top
Section
ADF Release Tab
Magnets