Filter
Top Products
Preface
C141-E163 iii
(Example)
Data loss
For MAP series, Reed Solomon codes are applied for their ECC. The
sector-data is divided into 6 interleaving sectors, and ECC is performed in
each sector where the maximum number of errors (up to 5 byte) can be
corrected. [Total maximum byte: 5 byte × 6 ( interleave) = 30 byte]
If the error of read sector keeps allowable error byte number, correction is
performed. However, if error byte exceeds its allowable number,
correction may not be performed properly.
The main alert messages in the text are also listed in the “Important Alert Items.”
CONVENTIONS USED IN THIS MANUAL
The MAP3147FC, MAP3735FC disk drives are described as "the intelligent disk drive
(IDD)", "the drive" or "the device" in this manual.
Decimal number is represented normally.
Hexadecimal number is represented as X'17B9', 17B9h or 17B9H.
Binary number is represented as "010".
Attention
Please forward any comments you may have regarding this manual.
To make this manual easier for users to understand, opinions from readers are needed.
Please write your opinions or requests on the Comment at the back of this manual and
forward it to the address described in the sheet.