Fujitsu MHV2080BH Computer Drive User Manual


 
5.3 Host Commands
C141-E224 5-73
Table 5.24 DEVICE CONFIGURATION IDENTIFY data structure (2/2)
Word Value Content
8 X ' 0015 ' Serial-ATA command set/function
Reflected in IDENTIFY information ”Word 76 to 79.
Bits 15-5: Reserved
Bit 4: 1 = Software Settings Preservation supported
Bit 3: 1 = Asynchronous Notification supported
Bit 2: 1 = Interface power management supported
Bit 1: 1 = Non-zero buffer offsets in DMA Setup FIS supported
Bit 0: 1 = Native command queuing supported
9 X ' 0000 ' Reserved for Serial-ATA
10 to 254 X'0000' Reserved
255 X'xxA5' Bits 15-8: Check sum code (This is obtained by calculating the sum of
all upper bytes and lower bytes in WORD 0 to 256 and the
byte consisting of bits 7 to 0 in WORD 255, and then
calculating the two's complement of the lowest byte of that
sum.)
Bits 7-0: