Filter
Top Products
6
LifeBook N Series Notebook BIOS
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Drive0
■
Auto
■
Disabled
[Auto] {Auto] automatically selects the Drive0 ATA/ATAPI device type. To change the
selection, press the [Enter] key to display the selections. Select [Auto] to have the
type automatically configured by the BIOS at POST. Select [Disabled] if you don’t
want to select a primary master.
Drive1
■
Auto
■
Disabled
[Auto] {Auto] automatically selects the Drive1 ATA/ATAPI device type. To change the
selection, press the [Enter] key to display the selections. Select [Auto] to have the
type automatically configured by the BIOS at POST. Select [Disabled] if you don’t
want to select a primary master.
Language:
___
[English] The default setting is English.
Table 2: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description