Filter
Top Products
4
LifeBook P Series Notebook BIOS
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu
Field
Options Default Description
Type: • Auto
• None
• CD-ROM
• Hard Disk
[Auto] (Note: There is no drop-down menu available for the Type field. To change
the options, use the plus ”+” and minus “-” keys or the spacebar.)
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Set-up items do not appear. If Hard Disk is selected, you must specify the
number of Cylinders, Heads, and Sectors for the drive.
Cylinders: • A number between
0 and 65,535
–— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
Heads: • A number between 1
and 16
–— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
Sectors: • A number between
0 and 63
–— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Primary Master [FUJITSU MK3018GAP-(PM)]
Type: [Auto]
Maximum Capacity: 30006MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
PIO Transfer Mode: [Fast PIO 4]
DMA Transfer Mode: [Ultra DMA 4]