Filter
Top Products
E-36
OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
INPUT TERMINAL
• Selecting D-SUB Input (D-SUB Input) All modes
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press .
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press or , one of the available choices appears in the following sequence:
RGB-PC Decoder
RGB-PC: For using RGB for PC
Decoder: For using digital broadcast tuner
(3) Press or to select Mask.
(4) Select Decoder by FUNCTION to set up Mask.
Each time you press or , one of the available choices appears in the following sequence:
Off: Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels
specified.
(5) Press to store.
"D-SUB Input" selection screen
OTHERS MENU
This fringe part is masked.
• Storing the setting of PICTURE (Picture Memry) All modes
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of "Load"
When setting "Load": Read out your desired Setting.
(1) Select “Picture Memory” and press .
The “Picture Memory” screen will appear.
(2) Press or to select Load.
(3) Select Data number to make Load.
(4) Press to read out.
In case of "Save"
When setting "Save": Set to suit your taste and store.
(1) Select “Picture Memory” and press .
The “Picture Memory” screen will appear.
(2) Press or to select Save.
(3) Select Data number to make Save.
(4) Press to save.
"Picture Memory" selection screen
"Load" selection screen