Filter
Top Products
E-6
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be
sure that your dealer performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the
corners of floor.
* The display can be installed with either of its sides facing down.
* To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P.E-42 for more information on options.
Front Side
Front Side
Front Side
When using other unit than desktop stand (vertical type)
When using other unit than desktop stand (horizontal type)
When using the stand
(cm) (cm)
(cm) (cm)
(cm)
(cm)
Upper
10
Floor
10
Left
10
Right
4
Wall
Floor
Upper
10
10
Left
10
Right
Lower
6
4
Upper
10
10
Left
10
Lower
10
Right
Wall
4
Wall
6
Stand
Stand
CAUTION: When installing the display vertically, setup vertical installation. (Refer to Installation. See P.E-40)
Consult your dealer when installing the display vertically.