Removing and installing componen ts
during servicing
Attaching the cover
1
1
2
► Place the cover in the correct mounting position (1).
► Fasten the screws (2).
► Replace the dust chamber cover (see "
Removing and fitting th e dust re moval
cover (ventilation slot cover)", Page 62).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare you r device fo r operation again as follows:
► Install the battery again (see "
Installing a battery", Page 55).
► Turn the notebook the right way up again a nd place it on a flat surface.
► Reco nnect the cables that you disconnected before.
96 Fujitsu Technology Solutions