Filter
Top Products
Working with the notebook
Key combinations
Key combinations cannot be changed.
You can find information on programming the tablet butto ns in "
Programming
the tablet buttons", Page 52.
Shortcut Meaning
4
+
A
1
Starting predefined application A
This button allows you to start a previously defined application.
By default, the button is precon figu red to start the Launch Center application.
4
+
B
2
Starting predefined application B
This button allows you to start a previously defined application.
By default, the button is preconfigured to start the Windows Journal
application.
4
+
3
Toggle output scree n
Use this key combination to select which screen(s) is/are used for display if
an external mo nitor is connected.
Screen output is possible:
• only on the notebook’s LCD screen
• only on the exte rnal monitor
• both the LCD screen and the external monitor.
Press the key combination several times to switch through all possible
settings.
If you have connect ed two external monitors to the port replicator, the
following display outputs are possible:
• only on the notebook’s LCD screen
• just the external monitor (analogue)
• simultaneously on t he LCD screen (digital)
• both the LCD screen o f the notebook and the external monitor (analogue)
You cannot switch output to both external monitors on the Port Replicator
via the key combination.
The table t button has a practical delay function: This allows you to press
the two buttons for a shortcut one after the o ther instead of ne eding to press
them bo th at the s ame time. After pressing the
tablet button, you have a
short time (2 to 3 seconds) to press the second button.
Fujitsu Technology Solutions 51