Fujitsu T4410 Laptop User Manual


 
Working with the notebook
Setting up W LAN access
Requirement: A WLAN must be available a nd you must have the
corresponding access information.
Information on conguring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS
If you ordered an integrated U
MTS module with your system , you can enjoy optimum
reception and maximum energy
efciency without awkward c ables or antennas. The
optional UMTS module is read
y for use straight away.
If you did not order a UMTS modu
le, you can purchase the accessories for UM TS reception
from your retailer or your F
ujitsu Technology Solutions de aler.
You will nd information on
establishing the connection with the UMT S network
in the documentation for th
e hardware used.
You can connect your device
with the Internet via UMTS. To do this, use one
of the following types of co
nnection:
a USB dongle ( a USB stick wit
h your m obile phone provider’s SIM card)
UMTS E xpressCa rd (for inserting in the ExpressCard slot of your device)
mobile end-device (e.g. mo
bile phone with Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebo ok supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
Connect the network cable to the LAN
port of the notebook (1).
Connect the network cable
to your
network connection (2).
Your network administrator can help yo u to cong u re and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
70 Fujitsu Technology Solutions