Fujitsu XG0448 Switch User Manual


 
XG0448 Hardware Guide
13
Notes on Maintenance
Customers should not repair this device. In the event of failure, consult with a Fujitsu service engineer or an engineer
certified by Fujitsu for maintenance.
Do not dismantle or modify this device in any manner. This device contains high voltage and high temperature parts
that can be dangerous.
Precautions for Use
As a guideline, the expected life of the device is approximately five years, assuming use at an ambient temperature of
25
°C.
Use of this hardware guide, the device, its firmware, and the management software are the responsibility of the user
and is undertaken at their own risk.
Fujitsu and its partners accept no responsibility for any errors or data loss arising from use of the product. Before using
the product, it should be understood that the device is not guaranteed against failure for any more than the original
purchase price.
Fujitsu and its partners do not approve of any use of the firmware provided with the device, or of any authorized
firmware upgrades, for any purpose other than installation in the intended device. Modification and disassembly are
not permitted under any circumstances. Use of the device or upgrading the device firmware implies acceptance of the
End User License Agreement stipulated within the User’s Guide.
Eliminating Static Electricity from Twisted Pair Cables (Grounding)
Under certain conditions, twisted pair cables can become charged with static electricity. Connecting a statically charged
twisted pair cable to the XG0448 can cause the device or its LAN port to operate falsely or to become damaged.
Use a static removal tool to discharge twisted pair cables to ground prior to connecting them to the XG0448.
Note that a discharged twisted pair cable that has been left unconnected for a long time may become statically charged
again.
Ensuring Security
If no password is set, any users on the network can configure this device. In that situation, you cannot ensure security
against unauthorized use. Therefore we strongly recommend that you set a password.
Cleaning
If cleaning the device while in service, use a damp soft cloth. Only use water or a mild detergent to dampen the cloth.
Avoid moisture entering vents or crevices in the chassis of the device.
Reference
"2.3.1 Discharging Twisted Pair Cable" (pg.35)
Reference
User’s Guide "5.14 Password Information" (pg.252)