GarrettCom DS50 Switch User Manual


 
Magnum DS50 / DS60s Dual Speed Hubs Installation and User Guide (06/02)
Power Supply (Internal) AC
AC Power connector: IEC-type, male recessed, rear of chassis
Power Input Voltage: 100 to 240 VAC (auto-ranging)
Power Input Frequency: 47-63 Hz
Power Consumption: typical 6 watts, 10 watts max.
Power Supply (Internal), Optional 24VDC and -48VDC
-48VDC Power Input Voltage : 36 to 72 VDC
24VDC Power Input Voltage : 20 to 36VDC
Std. Terminal Block : “ -, GND, + ”
Power Consumption: same as for AC models, see above
DC-DC Converter Rating: 5VDC, 2Amps
Manual Switches
Port 1 only, UP-LINK: MDI-X thumb-operated slide switch, converts RJ-45
port from a regular (= position) user segment port to a crossover (X position)
Port 6 only (DS60C): Thumb-operated slide switch FF-A, The port #6 switched
port can be set on “FF” (Full-duplex, Fixed 100Mbps) or at “A”(Auto-
negotiation) to support auto-negotiate.
Port 6 only (DS60F): Thumb-operated slide switch FDX-HDX, The port #6
switched Fiber port can be set on “Fdx” (Full-duplex, Fixed 100Mbps) or at
Hdx (Half Duplex) to provide better secure distance.
Packaging
Enclosure: High strength sheet metal.
Suitable for wiring closet shelf, wall or desktop mounting.
Dimensions: 9.1 in. D x 6.1 in. W x 1.3 in. H (23.0 cm x 15.5 cm x 3.3 cm)
Weight: 1.55 lb. (0.7 Kg)
Cooling method: Fan cooled, internal @ 7 cfm
LED Indicators on Chassis
PWR : Steady On when power applied
COL 100 (port1-5): Collision, flashing when collision occurs on
ports 1-5 in the 100Mb collision domain.
COL 10 (port1-5): Collision, flashing when collision occurs on
ports 1-5 in the 10 Mb collision domain.
LK/RX (port 1-5): Steady On when twisted-pair link is operational,
flashing when port is receiving data
100 (port 6): Speed is at 100Mbps
FDX (port 6): Port is at Full duplex
Agency Approvals (Under Test)
UL Listed (UL 1950), cUL, CE
Emissions: meets FCC Part 15, Class A
Warranty
Three years, return to factory Made in USA
3
www GarrettCom com
..