Gateway FPD1976W Computer Monitor User Manual


 
Using Your Gateway Flat-panel Monitor
18
Power management
ENERGY STAR
As an ENERGY STAR
®
Partner, Gateway has determined that this product meets the ENERGY STAR
guidelines for energy efficiency.
This monitor complies with the EPA’s International ENERGY STAR Program, which is a program
designed to encourage manufacturers of computer equipment to build circuitry into their
products to reduce energy consumption during time of non-use.
Energy declaration
When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
enters the Active Off mode (sleep). In the Active Off mode the Power LED turns orange.
Use these conventions and the power can be reduced to the following levels:
To “wake” the monitor when it is in Active Off mode, move the mouse or press any keyboard key.
Access the power management options in the Control Panel to change the period of time after
which the monitor enters these low power states.
Maintaining
To keep the monitor in optimal working order:
Do not block the ventilation holes.
Do not expose the monitor to rain or use near water.
Keep the monitor away from radiators or heat vents.
Keep the monitor out of direct sunlight.
To clean the monitor, use a soft cloth slightly moistened with water only. Wipe the cabinet,
screen, and controls.
Troubleshooting
If you have problems with the monitor, the information in this troubleshooting section may help
you solve them.
VESA state LED indicator Power consumption
On Blue < 38 W
Active Off Orange < 2W
Caution
Do not use any type of abrasive pad or glass cleaner. You will permanently
scratch the screen.
Important
Make sure that the monitor has warmed up for approximately 30 minutes before
making any judgments about the picture quality.