Filter
Top Products
24
Using Your FPD 1540 Monitor
www.gateway.com
Color is not uniform
■ Turn on the FACTORY PRESET control in the OSD, then press the RESET
button for several seconds to return the monitor settings to the ideal
settings. For more information, see “OSD controls” on page 9.
Image is not sized or centered correctly
■ Use the OSD controls to adjust the position of the display image. For more
information, see “OSD controls” on page 9.
■ Turn on the FACTORY PRESET control in the OSD, then press the RESET
button for several seconds to return the monitor settings to the ideal
settings. For more information, see “OSD controls” on page 9.
The monitor has pixels that are always dark or
too bright
This condition is normal and inherent in the TFT technology used in
active-matrix LCD screens. Gateway’s inspection standards keep these to a
minimum. If you feel these pixels are unacceptably numerous or dense on your
display, contact Gateway Technical Support to identify whether a repair or
replacement is justified based on the number of pixels affected.