Filter
Top Products
26
Chapter 2: Windows 98SE, WindowsMe, and Windows2000
www.gateway.com
9 After you name each computer and assign it to your
workgroup, go to “Step 3: Configuring the TCP/IP
protocol” on page 28.
To identify a Windows 2000 computer on the network:
1
Click Start, Settings, then click Control Panel. The
Control Panel window opens.
2 Double-click the System icon. The System Identification
dialog box opens.
3 Click the Network Identification tab.
4 Click Properties. The Identification Changes dialog box
opens.
5 Type a unique computer name in the Computer name
box. This name identifies the computer to other users
on the network. Use a computer name of up to 15
characters with no blank spaces. Each computer name
must be unique on your network. All-numeric
computer names are not allowed. Names must
contain some letters.
Important
You must give each computer on the network a
unique Computer Name and the same Workgroup
Name.
8509391.book Page 26 Tuesday, August 12, 2003 12:52 PM