Filter
Top Products
7-1
7. Specifications
Speed: Up to 105 cycles / minute, 60,000 sheets per hour
Sheet size: Punch edge 5 1/2” to 12”, side edge 5 ?” to 9”
Paper Stock: 61 gsm (16#) bond to 300 gsm (140#)
Intermixed weights, flush-cut covers, and standard index tabs
Lift Height: Variable, 5 to 12 sheets of 20# bond (75 gsm)
Stack Height: up to 14” (approximately 3,500 sheets of 20# bond (75 gsm)
Dimensions: 60”W x 55”L x 52”H (152cm x 140cm x 132cm)
(Easily breaks down to fit through a 32” doorway) see page 8
Weight: 850 lbs. (386kg)
Power Supply: USA/Canada: 220VAC, 50/60Hz, Single Phase, 2.7 Amps, 0.32 KW, 1,092 BTU/hr
International: 220VAC, 50/60Hz, Single Phase, 2.7 Amps, 0.32 KW, 1,092 BTU/hr
Receptacle Type 6-20R 20A, 250V
Approvals: CSA certified to CAN/CSA-C22.2 No. 60950-00, UL Std No. 60950-00, 3
rd
Ed.
TUV certified to EN 60950:2000
Compliance: Carries CE mark to show compliance with European Union requirement
Die Sets: Interchangeable die sets can be switched in seconds without tools
Specifications are subject to change without notice
GBC recommends ear protection for operators of the Quantum P70iX. Our
sound test levels are as follows:
SPECIFICATIONS Quantum P70iX
Worst Case Operation (speed 4, C4 Die Set,
20# bond, lift #9 – 12 sheets):
Sound Pressure Level = LpA = 83.0 dbA
Sound Pressure Impulse = LpAI = 85.2 dbA
Typical Use Operation (speed 2, PB Die Set,
20# bond, lift #9 – 12 sheets):
Sound Pressure Level = LpA = 78.5 dbA
Sound Pressure Impulse = LpAI = 83.5 dbA
ISO 7779 Test method and microphone place-
ment:
1.5M (59.1”) from Feeder,
1.5M (59.1”) high,
0.25M (9.85”) from vertical lead edge of
Quantum at control panel.
0.25
30°
Dimensions in meters
Standing operator
(9.85”)
1.5
(59.1”)