Filter
Top Products
GEH-6385 Reference and Troubleshooting, 2300 V Drives Chapter 5 Signal Mapping
•
••
•
5-9
Reference Feedback
Byte
Variable Functionality Variable Functionality
15 Droop disab req, lan
(Lan_Drp_Inh)
Droop disable select
(Drp_Inh_Adr)
Behavior 2
Speed mode active
(Spd_Mode_Act)
speed regulator function is
regulating speed
16 Trq lim 2 req, lan
(Lan_Tlim_Sel)
Torque lim 2 sel
(Tlim_Sel_Adr)
Behavior 2
In cur or trq lim
(Trq_Lim_Act)
Inner torque regulator in
limit=(Sreg_Frz_Pos||_Neg)
17 Ramp rate 2 req, lan
(Lan_Rmp_Sel)
Ramp rate 2 select
(Rmp_Sel_Adr)
Behavior 2
Not Used
18 Ramp bypass req,
lan
(Lan_Rmp_Byp)
Bypass ramp
(Rmp_Bypass)
MA contactor closed
(Seq_Stat.MA_Enb_
Stat)
sequencer task status;
real or modeled contactor status
19 Auto mode req, lan
(Lan_Auto_Req)
Auto mode select
(Auto_Adr)
Behavior 2
Auto mode active
(Auto_Mode)
result of Auto mode requests
20 Not Used Zero speed active
(Zero_Spd)
speed feedback is below zero speed
(after delay)
21-24 Not Used Not Used
25 GP lan req bit 01
(Lan_B01_Req)
general purpose bool var GP lan fbk bit 01
(Lan_B01_Fbk)
GP lan fb bit 01 sel
(Lan_B01_Adr)
.
.
.
32 GP lan req bit 08
(Lan_B08_Req)
general purpose bool var GP lan fbk bit 08
(Lan_B08_Fbk)
GP lan fb bit 08 sel
(Lan_B08_Adr)