Filter
Top Products
5-3
Setting the Options for FaxTel Mode
When selecting FaxTel mode, the following options can be set.
• Adjust the time the machine takes to check whether a call is from a fax machine or a telephone (RING START
TIME setting).
• Adjust the length of time the machine rings when the call is a voice call (F/T RING TIME setting).
• Set whether the machine switches to receive mode after the ring time set in F/T RING TIME has elapsed
(F/T SWITCH ACTION setting).
■ What Happens When FaxTel Mode is Selected
Telephone
Fax
Fax
Sending document
manually
Sending document
automatically
The machine answers without ringing.
The machine listens for the fax tone.
(for 8 sec.)
The fax tone
is detected.
The fax tone is not detected.
The document is
received automatically
.
The machine starts ringing.
Pick up the
handset to talk.
If you do not pick up the handset
(within 15 sec.).
F/T SWITCH ACTION
Choose between:
RECEIVE (Factory default setting) and DISCONNECT.
DISCONNECT
RECEIVE
(Factory default setting)
The fax tone is
detected and the
machine switches to
receive mode.
The machine
disconnects the call.
Not all fax machines are capable of sending a
fax tone. For those cases if you set the F/T
SWITCH ACTION to RECEIVE, the machine
switches to receive mode automatically and
starts receiving the document. If no document
comes in, it disconnects the call after
approximately 40 seconds.
F/T RING TIME
(Factory default
setting =15 sec.)
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting
=
8 sec.)
Receiving Faxes
5
05 FAX_Chp5.qxd 03.7.10 4:03 PM Page 5-3