Filter
Top Products
9-2
Menu Descriptions
COMMON SETTINGS
DEFAULT SETTINGS Selects which mode standby display appears in the LCD
when the power cord is connected, or the AUTO CLEAR
function* activates.
COPY The copy mode is selected.
FAX The fax mode is selected.
SW AFTER AUTO CLR Selects whether the machine switches to the mode you
set in DEFAULT SETTINGS after the AUTO CLEAR
function* activates.
DEFAULT MODE The machine automatically switches to the mode you set
in DEFAULT SETTINGS after the AUTO CLEAR
function* activates.
CURRENT MODE The machine does not automatically switch to the mode
you set in DEFAULT SETTINGS even after the AUTO
CLEAR function* activates.
VOLUME CONTROL Adjusts the volume of the unit.
1.KEYPAD VOLUME Adjusts the keypad volume.
ON 1 to 3 (1)
OFF The volume is turned off.
2.ALARM VOLUME Adjusts the alarm volume.
ON 1 to 3 (1)
OFF The volume is turned off.
3.TX DONE TONE Adjusts the volume of the done tone sounded when the
machine has finished sending faxes.
ON 1 to 3 (1)
ERROR ONLY 1 to 3 (1)
OFF The volume is turned off.
4.RX DONE TONE Adjusts the volume of the done tone sounded when the
machine has finished receiving faxes.
ON 1 to 3 (1)
ERROR ONLY 1 to 3 (1)
OFF The volume is turned off.
5.PRINTING END TONE Adjusts the volume of the done tone sounded when the
machine has finished printing.
ON 1 to 3 (1)
ERROR ONLY 1 to 3 (1)
OFF The volume is turned off.
Name Descriptions
(The factory default setting is in bold face.)
* (→ Reference Guide)
09 FAX_Chp9.qxd 03.7.10 4:00 PM Page 9-2