Filter
Top Products
9-5
9
Setting the Additional Functions
6.OFFHOOK ALARM Enables/disables the offhook alarm that alerts you when
the handset is not in the handset cradle.
ON After reception, the offhook alarm sounds when the
handset of extension telephone is left off the hook.
OFF No offhook alarm.
REPORT SETTINGS Sets the report setting.
1.TX REPORT Enables/disables automatic printing of a transmission
report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a transmission error occurs.
REPORT WITH TX IMAGE If you select PRINT ERROR ONLY or OUTPUT YES,
enables/disables printing of the first page of the fax under
the report.
ON Prints a first page only when a transmission error occurs.
OFF No first page is printed.
OUTPUT YES Prints a report every time you send a document.
2.RX REPORT Enables/disables automatic printing of a reception report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a reception error occurs.
OUTPUT YES Prints a report every time you receive a document.
3.ACTIVITY REPORT Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
ON Prints the ACTIVITY REPORT.
OFF No ACTIVITY REPORT is printed.
TX SETTINGS Sets the transmission functions.
1.ECM TX ECM (error correction mode) transmission is turned on
or off.
ON All transmissions are conducted with ECM if the other
party’s fax supports ECM.
OFF ECM is turned off.
2.PAUSE TIME Sets the length of the pause you insert into a dialing
sequence.
1 to 15 SEC (2 SEC)
Name Descriptions
(The factory default setting is in bold face.)
09 FAX_Chp9.qxd 03.7.10 4:00 PM Page 9-5