Filter
Top Products
5. Hardware Installation Instructions
The GE Multimedia keyboard and optical mouse can each be connected to either a USB or PS2 port. You
may choose a different connection type for each. Please follow the instructions below for your preferred
connection method.
USB
1. Disconnect the existing keyboard and mouse from your computer.
(Shut down your computer before disconnecting any PS2 device from your computer.
You may restart your computer after the PS2 device is removed.)
2. Plug the USB plug of your keyboard into any USB port on your computer or hub.
3. Plug the USB plug of your mouse into any USB port on your computer or hub.
PS2
1. Shut down and turn off your computer. Failure to do so could damage your computer.
2. Disconnect the existing keyboard and mouse from your computer.
3. Plug the USB plug of your keyboard into the USB port on the USB to PS2 adapter.
4. Plug the PS2 plug of the USB to PS2 adapter into the keyboard PS2 port on the back of your computer.
(This port is usually purple with a small icon of a keyboard as a label.)
5. Plug the USB plug of your mouse into the USB port on the USB to PS2 adapter.
6. Plug the PS2 plug of the USB to PS2 adapter into the mouse PS2 port on the back of your computer.
(This port is usually green with a small icon of a mouse as a label.)
7. Turn on your computer and start your Operating System.
Page - 5 -