Filter
Top Products
GFK-2023C Chapter 7 Driver Installation 7-5
7
Regional Settings
You can subsequently adapt the key assignment of your virtual keyboard to the standard
layouts of other countries. The settings are stored in an INI file. To change the settings,
you will need to modify the file in a text editor such as NotePad. This can be done as
follows:
1. Start the text editor and open the SOFTKEY.INI file from the following directory:
C:\Program Files\ADS-TEC\SOFT-KEYBOARD
2. The available keyboard layouts and relevant parameters are listed in the initial section
under Long version code.
3. In the program section under [Common] in the Long version parameter, replace the
code entered after the equals sign with the desired code and save the file as a text file
with the same name.
4. Open the software keyboard and press the Ctrl, Alt and F11 buttons one after the
other. To confirm, click OK. The settings are then immediately applied.
Note: You can make further alterations to the default settings of the software keyboard.
Information on altering the settings can be found in the README file on the floppy
disk.
Read/Write CD-ROM Utilities
Installation and application instructions for copying files to a write-able CD are provided
with the supplied CD Writer Utilities.