GE PDW8800 Computer Drive User Manual


 
Figure X
STEP 11 LEVEL DISHWASHER
IMPORTANT Dishwasher must
be level for proper dish rack operation and wash
performance.
TIP: Pull lower rack out, about halfway. Check to
be sure the rack does not roll forward or back into
dishwasher. If the rack rolls in either direction, the
dishwasher must be leveled again.
If door hits the tub, the dishwasher is not installed
correctly. Adjust leveling legs to align door to tub.
Level the dishwasher
by adjusting the
four leveling legs
individually.
If adjustment to the
right rear leveling leg
is required, gain
access by loosening
junction box bracket
screw (through the
access hole) and
rotate bracket clock-
wise.
Figure Y
Installation Instructions
9
Place level on
door and rack
track inside the
tub as shown to
check that the
dishwasher is
level.
The dishwasher must be secured to the countertop or
the cabinet sides. When countertops are made of wood,
use Method 1. When countertops are granite or other
materials that will not accept screws, use Method 2 to
secure dishwasher at the sides.
Figure AA
Figure BB
STEP 12 SECURE DISHWASHER, TO CABINET
Figure Z
Method 1
Secure dishwasher to wood countertop
Fasten the dishwasher to the underside of the countertop
with 2 Phillips screws provided.
Method 2
Secure dishwasher with side mounting brackets
Remove plug buttons (one on each side).
Install screw through the dishwasher and into the
adjacent cabinet on each side. Reinstall plug buttons.
Check
Level
Side
To Side
Check
Level
Front
to Back
Countertop
Mounting
Brackets
Tub
Frame
Side Mounting
Brackets
IMPORTANT After leveling,
verify that the dishwasher is still in the correct position
shown in Step 10.
IMPORTANT Drive screws
straight and flush. Protruding screw heads will scratch
the top or sides of the control panel and can interfere
with door closing.
Brackets
Wood Countertop
Screws
Plug Buttons
Side Mounting Brackets
Stone Countertop
Turn Legs
to Adjust
Access Hole